SDS-Jet Tunnel Ventilation Fan - Shandong China Coal Ventilation Equipment Branch

SDS-Jet Tunnel Ventilation Fan - Shandong China Coal Ventilation Equipment Branch

SDS-Jet Tunnel Ventilation Fan Introduction

SDS Jet Tunnel Ventilation Fan is specially used for the tunnel lengthways ventilation system, the fans should be hanged on the top roof of tunnel,to avoid effecting the traffic, no need to build exhaust way.  Ideal ventilation fans.

Minelab 5000 Gold Detector;Gold detector; 5000 gold detector;Minelab gold detector -Gold Detector - Product Center - Shandong China Coal Industry & Mining Group

Minelab 5000 Gold Detector;Gold detector; 5000 gold detector;Minelab gold detector -Gold Detector - Product Center - Shandong China Coal Industry & Mining Group

Product Introduction

1. High-brightness LCD panel can generally displays the detected metal type according to the signal strength.
2. The all-metal detection mode is suitable for searching metal objects on the ground, and can be used as simple recognition of metals.
3. In addition to LCD panel display, it can distinguish metal types by tones.
4. 11-inch disk waterproof probe that can detect in the shallow water.
5.  Equipped with an external headphone jack ,connected to a single-channel headphones (headset-owned), easy to use.
6. Built-in high-capacity rechargeable battery,Worked continuously for more than ten hours when full of power(with charger).

Main Parameter

1. Max Depth:1~7m
2. Signal Frequency:9.6KHz
3. Audio Frequency : 400Hz
4. Power Supply:DC12V
5. Power Consumption:0.8W
6. Connecting Rod Length: 1.3m
7.  Coil dimension:40cm
8.  Net Weight:6Kg
9. Gross Weight:10.5kg
10. Package Size:800*360*190mm

Figure Photos

Minelab 5000 Gold Detector

12v/24v Air Compressor - Shandong China Coal Ventilation Equipment Branch

12v/24v Air Compressor - Shandong China Coal Ventilation Equipment Branch

Specifications

1. 160PSI
2. 5M PU air hose
3. 5M cord with clamps
4. nozzle adapters and 1 sports needle

12v/24v  compressor Product Introduction

This air compressor is especially designed for shorted inflation time. normal single tire can reach the normal air pressure within2-3 minutes , 4 tires easily get 10 minute, single 15-20 minutes of continuous use, large tires fill the gas can also be used.

Instructions for use:

1, remove the product from the bag, pump nozzle alignment tire filling valve, nozzle tighten in a clockwise direction.

2, insert the 12V cigarette lighter plug in the car cigarette lighter.

3, switch to the “ON” position and get to work. Inflatable watch barometer pressure, the tire will be under pressure to switch to the “OFF” position.

4, in a counterclockwise direction will air pump nozzle, loosen, pull the cigarette plug in from the cigarette.

5, around the wire and rubber pipe well into fixed slots.

12v/24v air Compressor Main Parameter

Max gas flow:	160LPM(12V)
Max electric current:	45A
Max working pressure:	150PSI
Max environment temperature:	60°C
Lowest environment temperature:	-40°C
Max working cycle:	40mins@30psi@ 22°C
Size:	27cm length, 14cm width, 20cm height

Grab bucket-Shandong China Coal Group

Grab bucket by about two or more combinations of jaw opening and closing crawl and unloading bulk material spreader, composed of a plurality of jaw gripper also called grab. According the driving type divided into mechanical and hydraulic grab.

Category

According the shape,can be divided into shell-shaped grab and orange petal grab, the former consists of two full buckets, the latter having three or more of the jaw plates. According the driving type divided into mechanical and hydraulic grab.

Description

According Grab definition: grab for handling a variety of goods. So what kind of cargo loading and unloading, it should be equipped with the corresponding grab. With the wrong with low efficiency, that is can not be used. For example: the need for loading and unloading cargo kinds of coal, it is equipped with a lightweight double disc grab, if equipped with a heavy-duty double disc grab mine, loading efficiency of at least 50% lower. For another example: the need for loading and unloading cargo kinds of coal, it is equipped with double disc grab, if equipped toothed timber grab, it should be a Chinese proverb, bamboo basket to fetch water, nothing. Can not be used.

Photo

Grab bucket-Shandong China Coal Group

Pulley-Shandong China Coal Group

Lifting pulley is an important tool for lifting ,simple structure, easy to use, able to change the pulling direction of pulley and block group and lifting or moving operation goods, especially by the coalition pulley block with winches , mast or other lifting machinery.

Product Detail：

Product Introduction

Lifting pulley is an important tool for lifting ,simple structure, easy to use, able to change the pulling direction of pulley and block group and lifting or moving operation goods, especially by the coalition pulley block with winches , mast or other lifting machinery.

Usage

Widely used in the construction and installation operations. Product specifications from 0.03-320T, round pick from a single round to ten round, hanging with a hook, chain ring, rings, hanging rings and beams for choose.

Photo

Pulley-Shandong China Coal Group

Lifting magnet crane AYC2

http://www.chinacoalintl.com/pd-762 
This product uses high-performance magnetic materials, big suction, small size, light weight, safe and convenient operation, no power, energy conservation is an ideal spreader suitable for shipbuilding, engineering machinery, automobile and other industries normal steel lifting and handling.

Product Detail：

Product Introduction

This product uses high-performance magnetic materials, big suction, small size, light weight, safe and convenient operation, no power, energy conservation is an ideal spreader suitable for shipbuilding, engineering machinery, automobile and other industries normal steel lifting and handling.

Feature

This product is unique internal magnetic circuit design, small remanence, long life, high safety factor. Underside using 'V' shaped groove design, lifting the corresponding bar or bar, no power, magnetic long-lasting, safe, lifting without gripping tool that does not damage the surface of the object to be lifting, greatly reducing the lifting operations time and improve production efficiency.

Photo

Lifting magnet crane AYC2

Mine pulley-Shandong China Coal Group

Mine pulley is an essential product in lifting equipment , Shandong coal mining group company staff uphold the credibility of life, quality of survival, the customer is god principle, for both new and old customers and make new contribution efforts.

Product Detail：

Technical Parameter

Item No.	Model No.	Guide wire	Rated load (kN)	Weight (kg)	Note
10171	SHD-120×30	LGJ25～70	5	1.5	aluminum wheel
10172	SHD-160×40	LGJ95～120	10	2.5
10173	SHD-200×40	LGJ150～240	15	4
10174	SHD-200×60	LGJ150～240	15	4.6
10175	SHD-250×40	LGJ150～240	20	4.6
10176	SHD-250×60	LGJ300～400	20	6
10177	SHD-270×60	LGJ300～400	20	7
10178	SHD-320×60	LGJ300～400	20	9.5
10179	SHD-400×80	LGJ400～500	20	15

Photo

Mine pulley-Shandong China Coal Group

Pallet fork-Shandong China Coal Group

Pallet Fork Introduction

1、Pallet fork is equivalent of mechanical hand mounted on a forklift, that become a versatile and efficient material handling tools, capable of handling almost any conceivable object fork, tongs, push, pull, side shift and rotate operations, thereby improving logistics efficiency, reduce production costs and avoid product damage and saving storage space.Widely used in warehousing, paper, packaging, printing, tobacco, household appliances, wine and beverages, wool textile, ports, railway, automobile manufacturing, steel smelting, chemical and construction industries.　　

2、Can according to customer requiremetn, providing a variety of special specifications fork. 　　

3、In addition to ordinary hook type fork, it can also provide dynamic load forks, explosion fork, fork-shaped hood, folding forks, sleeve type fork, fork extension, drum cartridge type fork, wooden with goods fork, square fork, forks and other special profiling fork.

Photo

 

Y26 Rock Drill

Product Introduction

Y26 pneumatic rock drill is an important tool for rock drilling operation in mines, railway, communication and water conservancy projects. Suitable for making horizontal and inclined blast holes in medium-hard and hard rocks. Computer controlled drilling machine from the factory run test bed, grasp the dynamic characteristics of each product to avoid the occurrence of human error to ensure that the manufactured products of excellent quality and superior performance.

Main Characteristics

1. The use of modern design means,performance of each product is optimized.

2. For all operating agencies were arranged according to ergonomic principles, to ensure that the products of high-performance, high efficiency and convenience of operation, security.

3. Quality materials and scientific and forging, all reflect the "quality " content, to ensure that the products of high strength, high wear resistance and impact resistance.

4. CNC machining, Unicase automatic line treatment, given "quality" of the guarantee and the "tough" self-confidence.

Technical Parameters

Underground Tunneling Drilling Jumbo-

Product Introduction

The wheel type hydraulic drilling jumbo is mainly used to drill blast holes for tunneling constructions in coal mine, non-ferrous metal mine, hydro-power station, railroad, highway engineering etc. Advanced hydraulic rock drill system, anti-jamming mechanism make the jumbo drilling on face, slope, roof, side wall and floor in underground mine or tunnels. This small compact jumbo has a low center of gravity, great mobility, remarkable stability and strong grade ability thus can be improve working environment and get efficiency, quality development.

Operating Principle

1. Hydraulic pilot control system, anti-interference ability, good stability and high quality. Equipped with a powerful engine and exhaust gas purification device to meet the Euro III emission standards. 2. Dual-axis drive, rear-wheel hydraulic steering walking system, mobility and high maneuverability. Working Boom dynamic load good stability, operational flexibility, range construction, no construction blind spots, enabling fast, accurate positioning. 3. Advanced drilling control system with automatic anti-jamming protection function, high efficiency. the overall lift the cab broad view of the operation. 4. Auxiliary arm with advanced the SP services platform, carrying large job security. The electronic control system is sealed, protective properties, can be adapted to the construction of high dust environment. 5. Simple operation and easy maintenance.

Technical Parameters

Item	Unit	Specification
Outside dimension (L *w*h)	mm	11210*1850*2340
Hole depth(feed at once)	mm	3300/3900
Hole size	mm	ø42 ~ø76 ~ø102
Max.cross section(W*H)	m*m	6.5*6
Length of feeder	mm	3700/4350
Feeder compensation	mm	1250
Electric motor capacity	KW	65
Voltage	V	280
Traveling speed	KM/h	0~14
Engine	KW	49
Boom raising	°	+65/-30
Swimming boom	°	35 left and right
Boom compensation	mm	1250
Boom rotation	°	±180
Boom number		1
Drilling speed	m/min	0.8~2
Impact power	KW	18.8
Max. Climb capability		25%(approximately 14°)
Min turning radius	mm	6000
Stabilization while drilling		by jacks
Total weight	kg	12500